Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.58'' Cutting Length, 1/2'' Cutting Diameter, 3'' Length (Pack of 1)


Free Shipping Included! Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.58'' Cutting Length, 1/2'' Cutting Diameter, 3'' Length (Pack of 1) by Bassett at Hightech Construction Co. MPN: B10227. Hurry! Limited time offer. Offer valid only while supplies last. Bassett MCH Series single end solid carbide 4 flutes chamfer tool. 90 degrees point angle. Applicable for steel, cast iron, nonferrous material.Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of


Images:
Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.58'' Cutting Length, 1/2'' Cutting Diameter, 3'' Length (Pack of 1) by Bassett (Image #1)
4.6 out of 5 stars with 26 reviews
Condition: New
Availability: In Stock
$33.77


Quantity:  

 


View More In End Mills.

Product Description & Reviews

Bassett MCH Series single end solid carbide 4 flutes chamfer tool. 90 degrees point angle. Applicable for steel, cast iron, nonferrous material.Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems.

Features & Highlights

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Round shanks allow use with a wide variety of toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Applicable for steel, cast iron, nonferrous material
  • Made in the USA

Additional Information

Brand:
Bassett
Manufacturer:
Greenfield Industries, Inc.
Category:
End Mills
Model:
B10227
MPN:
B10227
UPC:
662355329191
Part Number:
B10227
Size:
1/2 in
Publisher:
Greenfield Industries, Inc.
Binding:
Misc.
Package Weight:
0.3 pounds
Package Size:
0.7 x 0.6 x 3.4 inches

 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


OSCARBIDE Carbide End Mills Set 6 Pieces Cutting Dia(1 2 3 4 6 8mm) Square CNC Milling Cutter 4 Flutes TiAN Coated Spiral Router Bits for Alloy Steels/Hardened Steels
By OSCARBIDE
ean: 0726587445279,
Brand: OSCARBIDE Material: Carbide with TIAIN Coated Flute: 4  Milling Cutter Size Cut diameter:1mm, Shank diameter:4mm,Overall Length:50mm; Cut dia...

SpeTool 12402 4 Flutes Carbide CNC Square Nose EndMill, 3/8" Shank Diameter, 3" Long, Spiral Router Bit with Coated
By SpeTool
mpn: P4EL-D3/8,
Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length; Flat Top with 4...

SPEED TIGER IAUE Carbide Square End Mill for Aluminum Applications - High Feed U-Type Design - for Roughing and Finishing - 3 Flute - IAUE1/2"3 (1 Piece, 1/2")
By SPEED TIGER
mpn: IAUE1-2-3, ean: 4712805504350,
SPEED TIGER PRECISION TECHNOLOGY CO., LTD. stands for HIGH-QualityEstablished in 1998, specializing in the production of precision carbide end mills, ...

RedLine Tools - 3/8 (.3750) Carbide Drill Mill, Uncoated (Bright) 4 Flutes 1.0000 Flute Length, 2.5000 OAL, 30° Helix Angle, 90° Point Angle, 3/8 (.3750) Shank Diameter - RDM40324
By RedLine Tools
mpn: RDM40324,
Uncoated (Bright). American Made Carbide. 30° Helix Angle. Photos may not be the exact representation of products.. 90° Point Angle.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - hightechconstructionco.com. All Rights Reserved.