End Mills - Page 4 - Super Savings! Save up to 38%
Super Savings! Up to 38% off on End Mills at Hightech Construction Co, Page 4. Top brands include SpeTool, Cobra Carbide, Accusize Industrial Tools, Cleveland, Niagara Cutter, Drill America, TTC, Micro 100, F&D Tool Company, All Industrial, CuleedTec, Knugoua, JERRAY, New Hope Store, & HHIP. Hurry! Limited time offers. Offers valid only while supplies last.
Cobra Carbide 23378 Micro Grain Solid Carbide Regular Length General End Mill, Uncoated (Bright) Finish, 4 Flute, 30 Degrees Helix, Ball Nose End, 3/4" Cutting Length, 1/4" Cutting Diameter, 2-1/2" Length (Pack of 1)
mpn: 23378, ean: 0798167886017,
4.7 out of 5 stars with 26 reviews
Cobra Carbide general end mill has center cutting geometry. Designed for milling, slotting, profiling and trace milling. Used for finishing operation. Manufactured from premium sub micron grain carbide. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applicat
Cleveland C32625 HGC-4C Cobalt Multi-Flute Single End Center Cutting End Mill
mpn: C32625, ean: 0697334326250,
4.2 out of 5 stars with 41 reviews
Cleveland (CLEBX) HGC-4C general purpose finisher 4 flute, cutting diameter 3/8-inch, length of cut 0.75-inch cobalt TiCN. General purpose finisher. 4 flute, cutting diameter 3/8-inch, length of cut 0.75-inch. Cobalt TiCN.General purpose finisher. 4 Flute, cutting diameter 3/8'', length of cut 0.75''. Cobalt TiCN. Made in the USA.
Niagara Cutter N85591 Carbide Square Nose End Mill, Inch, TiAlN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 2.5" Overall Length, 0.203" Cutting Diameter, 0.250" Shank Diameter
mpn: C430-0.203-F3-S.0-Z4, ean: 0698036855918,
4.4 out of 5 stars with 12 reviews
The Niagara Cutter C430 TiAlN-coated carbide square nose end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The tool’s square end creates sharp, unrounded cuts, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong
Drill America CBD 1/16" Carbide End Mill 3 Flute 1/8" Flute Length 1-1/2" Overall Length Uncoated (Bright) Double End Stub
mpn: CBD800116, ean: 0887861249836,
4.8 out of 5 stars with 8 reviews
Size: 1/16, material: Carbide, finish: uncoated (bright), flute Length: 1/8, overall Length: 1-1/2, shank size: 1/8, style: double end, stub, number of flutes: 3, center cutting: non center cutting. Solid Carbide premium micrograin end mill. Made in U.S.A.Size 1/16''. Material: carbide. Finish: uncoated (bright). Flute length: 1/8. Overall length: 1-1/2.
TTC R8 x 1" Arbor Precision Shell End Mill Arbor
4.5 out of 5 stars with 18 reviews
Prevents run-out of your cutting tools.. Holds shell mills and face mills.. Heat treated.. Range Diameter: 2-1/4'' - 2-3/4''.
Tapered Ball Nose End Mill, Tungsten CNC 2D and 3D Carving Router Bits End Milling Cutter Drilling Hole Bits for PCB Circuit, Plastic, Fiber, Wood, Copper 0.45mm, 0.75mm, 1mm, 1.25mm Set of 4
You Save: 38%
4.9 out of 5 stars with 23 reviews
Features: With bending strength, High hardness, high wear resistance, ensure high working efficiency. Suitable for cutting, end milling, CNC, Engraving machine, slotting, etc. And can work on aluminum, solid wood, PCB circuit board, Hard wood, plywood, etc. Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches. Specification: Material: Tungsten solid carbide Color: silver white Size: Cutting edge diameter, 0.45mm/0.018'', 0.75mm/0.03'', 1mm/0.04'', 1.25mm/0.049'' Ova
HHIP 5835-0437 7/16 x 3/8" 4 Flute M42 Cobalt Single End Center Cut End Mill
mpn: 5835-0437, ean: 0769053095530,
4.8 out of 5 stars with 21 reviews
7/16 X 3/8'' 4 Flute M42 Cobalt Single End Center Cut End Mill ~ Ground From Solid ~ Center Cutting ~ for profiling, shoulder milling and finishing operations ~ AH ~ Choose cobalt end mills on hard work materials or when there is a problem with wear or short tool life. ~ Flute length is 13/16. ~ Overall length is 2-1/2.Ground From Solid. Center Cutting. For profiling, shoulder milling and finishing operations. 8% M42 Cobalt is designed to cut difficult and abrasive materials ranging from medium